Products > New Diagnostic Software
Vag K+Can V3.6 With New Fuctions
Item No:
Price:,
VAG K+CAN Commander V3.6 + Other Important Compatible Programs Using K-Line Connection.This Cable (vag commander K+CAN) is providing many Diagnostic functions via CAN and Special functions via K-line.Under easy OBD connection.
VAG K+CAN COMMANDER 3.6,VAG K+CAN 3.6,VAG K+CAN,vag k+can V3.6,vag cable,Vag 3.6
Hits:6544
  Description:
Vag K+Can V3.6 With New Fuctions
 
Description:
 
VAG K+CAN Commander V3.6 + Other Important Compatible Programs Using K-Line Connection
 
This Cable (vag commander K+CAN) is providing many Diagnostic functions via CAN and Special functions via K-line.Under easy OBD connection.
 
Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80).This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.
 
Manual definition of running diagnostic session not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.
 
Broadcast diagnostic request disable normal communication, clear DTCs, Logistic (transport) mode, Functions are under CAN-TP2.0.
 
Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.
 
Most of popular diagnostic requests identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0.
 
Special function - odometer correction in instrument clusters and EDC15x
 
Special function - read Security Access Code/Login WFS
 
Special function - read/program immobilizer data.
 
Special function - read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.
 
Special function - VAG MMI TV Activation
 
Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8, Porsche
 
Special function - Key learning buttons for easy usage (not needed security code).Can do component security authorization.
 
Special function - Key learning Porsche CAYENNE (not needed security code) K+CAN
 
Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..
 
Special function - Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories
 
Special function - Crash data clear in airbag units
 
The Main Software
 
 
This Cable can be also used by many other useful programs will be listed below, those programs are compatible to work with vag K+CAN Cable via direct OBD connection, since they are using "vag commander cable" as a serial K-Line cable to support more programming functions.
You will need to go to the device manager menu (right click my computer, properties, hardware, device manager), then right click your device driver on the device manager menu, open the properties screen and change the virtual COM port number of the FTDI driver to "COM1" also make sure to set "COM1" as COM setting for all the following software to be able to run them correctly using "vag K+CAN Cable".
 
Compatible Programs
 
1.VAG EEPROM PROGRAMMER V 1.3
 
It can read data from ECU such as (current Mileage-login code-immobilizer info. and changing mileage) for different vag cars.
 
 
 
This software provides many diagnostic and programming functions for vag cars, it can read DTC from different modules, also it read/write immo data from immo box or instrument cluster, it can change mileage, read/write data to car's ECU…etc. all functions can be done via k-line OBD connection.
 
 
3.VAG DASHTOOL BY GOPEL
 
For mileage correction via OBD for different made/models of vag cars.
 
 
 
Mileage Correction for VW cars equipped by EDC15, via OBD.
 
 
 
Software to connect to airbag module (SRS) for different vag cars to read DTC and carsh data, then to CLEAR the crash data via k-line OBD connection.
 
 
 
Read /write/Edit, Flash / EEPROM data files for EDC15, EDC16 and other cars ECU, it can calculate checksum and offers protection option to write password protected files to car's ECU. More advantage function is IMMO OFF function to disable the immobilizer system.
 
 
 
Small software to change mileage via OBD for Skoda Fabia with 93C86 EEPROM on its Dashboard.
 
 
 
This software can read PIN Code for Audi TT and VW Beetle via OBD Connection.
 
 
9.OPEL KM CALIBRATION WITH NEC78082x
 
Mileage Correction software for some OPEL cars with NEC 78082x on the dashboard, mileage can be adjusted via OBD connection.
 

[Previous]:Vag K+Can V3.6 With New Fuctions
[Next]:WinOLS v1.5
Copyright © 2010 www.randlatech.com All Rights Reserved
All logos and trademarks in this site are property of their respective owners
E-mail: randlatech@gmail.com MSN: randlatech@hotmail.com Skype: randlatech