Products > New Diagnostic Software
OTOCHECK IMMO TOOL 2.0
Item No:
Price:,
Otocheck is an advanced Immobilizer repair tool used to repair immobilizer problems in vehicles with faulty ECU's or immo boxes or in situation where all keys have been lost. It can also be used for track cars where a donor engine has been used or an ECU swap out. This is an advance tool with a comprehensive coverage a must for all lock smiths and ECU repair stations worldwide.
OTOCHECK IMMO TOOL 2.0,OTOCHECK IMMO TOOL,OTOCHECK,OTOCHECK TOOL,Immobilizer too
Hits:4535
  Description:
OTOCHECK IMMO TOOL 2.0
 
What is otocheck immo tool?
Otocheck is an advanced Immobilizer repair tool used to repair immobilizer problems in vehicles with faulty ECU's or immo boxes or in situation where all keys have been lost. It can also be used for track cars where a donor engine has been used or an ECU swap out. This is an advance tool with a comprehensive coverage a must for all lock smiths and ECU repair stations worldwide.
 
What is included?
You will receive the software with an activation Key, The software will run on any Laptop/PC running XP or win2000. Updates will be provided when available for a small fee.
 
Using the software
In Order to repair an immobilizer problem we first need to read the chip that stores the immobilizer data. This is normally in the form of an 8 pin Eprom found in the ECU or immobilizer box located behind the dash.If you are unsure of the location or chip type you can select the make/model before starting in order to identify the chip/location in question.Once identified you will need to read the chip with your own programmer. For Eproms we recommend SeeProg by Elnec and for a wider chip coverage UPA USB by elrasoft which will cover many MCU processors. After reading the chip save a copy to your machine (also make a backup) to load into the software.
 
Supported CAR/ECU list:
 
Please download the car/ECU list file:
 
 
Software display:

Vehicle selection process

vehicle model selection

At this point information on the model is available such as chip type and location
 
A larger image is available by simply clicking on the image....
Please note a 95xxx eprom is the same as a 25xxx eprom
You can now load your .bin file from the faulty ECU, to load your file simply click on file > open and browse to the location of the saved dump.
 
 
Otocheck will compare the dump size and structure you have loaded to check if it's the correct chip before allowing you to continue.
If all checks out you will see the next screen if not an error message "Dump Incorrect size will be presented, at this point you will need to read the chip again.
Now you can start the repair process, by clicking on the start button OtoCheck will analyze your data file and start the repair process.
This can take 2 - 3 minutes so please be patient at this point.
Error checking process, almost complete
Once completed OtoCheck will display a "Repaired OK" message. Click on file > save as >
and now save the repaired .bin to write back to your ECU.
 
 

[Previous]:OTOCHECK IMMO TOOL 2.0
[Next]:Tachosoft mileage calculator 21.5
Copyright © 2010 www.randlatech.com All Rights Reserved
All logos and trademarks in this site are property of their respective owners
E-mail: randlatech@gmail.com MSN: randlatech@hotmail.com Skype: randlatech